Your search for aluminum alloy resulted in 15 matches...
The aim of this study was to determine the impact of technological factors (surface treatment and contact time) on the kinetics of wetting of nickel substrates by a liquid aluminum alloy. Wetting kinetics studies were carried out in vacuum at 700&...
more >>
The article presents preliminary results of research on ablation casting technology. The guidelines for the design of equipment to carry out the process are described. Based on the above mentioned instructions a test stand was developed and built....
more >>
On the basis of assumed curves of treatment the distribution of temperature fields was determined in selected model castings achieved during heat analysis, then assuming these values as boundary conditions an integrated strength analysis was carri...
more >>
The paper presents results of wrought alloys casting trials under external pressure. Three alloys were used in the experiment - namely: 2024, 6061 and 7075. The examinations were conducted on squeeze cast parts that solidified under high pressure ...
more >>
The article describes several variations of the semi-solid metal processing (SSM) technique rendering castings with non-dendritic structure and significantly improved mechanical properties. The metal slurry was produced using the Rapid Slurry Form...
more >>
The study was conducted for two selected 7xxx series aluminum alloys according to PN-EN 573-3:2010 - Polish version. The analysis of ingots was carried out on 7003, 7003S and 7010, 7010K alloys with a similar ratio of zirconium content. Symbols S ...
more >>
The paper presents research on the possibility of improving the plasticity of near-eutectic AlSi11 alloy by the use of soft annealing treatment. For two assumed input quantities, i.e. temperature and duration of the soaking treatment, based on the...
more >>
The development of a new element is a very complex procedure requiring a combination of many factors related to the design and manufacture phases. The most efficient way is to use computer simulation which allows for verification of the whole desi...
more >>
The sessile drop method was adopted to investigate the effect of multiple re-melting and casting of metal matrix composite on the structural stability of metal-ceramic slurry. Commercial aluminum matrix composite made of the A359Al alloy reinforce...
more >>
The article presents the results of investigations into castings made of four aluminum alloys produced with the use of squeeze casting technology.The investigations used the following alloys: EN AW 7022 (AlZn5Mg3Cu) and its modification with...
more >>
Chromium coatings modified with nanodiamond particles were deposited on aluminum alloys. The concentration of the nanodiamond particles in the chrome plating electrolyte was from 5 to 25 g/l. The thickness of the layer varied between 30 and 70 &mu...
more >>
One of the aspects of sustainable development is the reduction of the concentration of CO2 in the atmosphere. This could be achieved for example by the reduction of fuel consumption. That is why the research for the new construction and...
more >>
The article presents a fragment of results of R&D works carried out at the Foundry Research Institute concerning the development of modern casting materials from ferrous and non-ferrous alloys to make horseshoes with increased durability. Prob...
more >>
The article presents the history and current state of the technology of external pressure casting in the case of High Pressure Die Casting (HPDC) and Squeeze Casting (SC). The similarities and differences between the two technologies and the commo...
more >>
The paper presents an attempt to assess the mechanical properties of high-strength AlZnMgCu aluminium alloy samples cast in gypsum moulds. The first stage of the study involved the use of computer simulations to select the opti...
more >>
| 
